size small than Raspberry Pi with Multi-Function
Why Raspberry Pi
suggest you need use External USB Hub with power
Adapter?
because they
design use 140mA fuse in each USB port, "140mA",
but USB spec need
500mA for each port,
that's why lots
people have power issue for USB port.
in Rs-pi V2 they
remove the Fuse design, and yo don't have any
protect from Rs-Pi USB port.
What
you can do
?
1. modify
Rs-pi Fuse power circuit.
2. Use
external USB Hub with power adapater
Our RS-Pi
internal USB hub with 1.5A polyswitch fuse and use
USB signal (D+, D-) from Rs-pi only,
not use power
from USB portand use Raspberry
Pi 5V from P1 pin2 , so if you have good quality
"more than 1.2A" DC 5V adapter , then you can use
our Rs-Pi USB hub no
problem.
if your device
need more power, we also can provide extra 5V
input(J13 mini USB B).
The Rs-Pi V1
board if you not modify the fuse circuit, you may
need plug in extra Dc 5V from
(J13 mini USB B),
for the Rs-Pi V2
no need for this input.
Raspberry Pi internal 7 Ports USB
Hub & I2C 23017 -1 (16 GPIO) Board
Rs-Pi 7 Port USB hub 23x17-1 board plug-in
Raspberry Pi
Rs-Pi 7hub 23x17-1 plug in Raspberry Pi with
16 GPIO LED "ON"
Spec Detail
1. U15 I2C
23017 16 GPIO
23017 ; 23017 ; 23017 Datasheet
2. U2 - USB 7 Ports HUB chipset
J1 (JP3) USB HUB upper
port signal input from Rs-Pi
3.
J13
Mini USB 5V input for USB Hub, you don't need plug 5V ,
the USB Hub
already use 5V from Raspberry Pi
(P1 pin2), if your
USB device need more power,
then you
can plug-in 5V in
this port.
4. J11 for RS-Pi V2 GPIO connector
(got 4 more GPIO pin)
