Raspberry Pi - 7 USB Hub & I2C AD/DA - 1-Wire   Board

  

Raspberry Pi internal 7 Ports USB Hub & AD/DA &

Multi-function I2C & 1-Wire Board

 

(RTC-DS1307, Temperature Sensor-TMP102, D/A ,A/D ,

EEPROM, DS2482-100)

 

 size small than Raspberry Pi with Multi-Function

 Why Raspberry Pi suggest you need use External USB Hub with power Adapter? 
 because they design use 140mA fuse in each USB port, "140mA", 
 but USB spec need 500mA for each port,
 that's why lots people have power issue for USB port.
 in Rs-pi V2 they remove the Fuse design, and yo don't have any protect from Rs-Pi USB port.
 
 What  you can do ? 
  1. modify Rs-pi Fuse power circuit.  

2. Use external USB Hub with power adapater 

 
  Our RS-Pi internal USB hub with 1.5A polyswitch fuse and use USB signal (D+, D-) from

Rs-pi  only,  not use power from USB port and use Raspberry Pi 5V from P1 pin2 , so if you have good quality  "more than 1.2A" DC 5V adapter , then you can use our Rs-Pi USB hub no problem.

 if your device need more power, we also can provide extra 5V input(J13 mini USB B).
 The Rs-Pi V1 board  if you not modify the fuse circuit, you may need plug in extra Dc 5V from

(J13 mini USB B), for the Rs-Pi V2 no need for this input.

 

 

 

 

Raspberry Pi internal 7 Ports USB Hub & AD/DA &

Multi-function I2C 1-Wire Board

 

(RTC-DS1307, Temperature Sensor-TMP102, D/A ,A/D ,

EEPROM, DS2482-100)

 

 

  

                 

 

              

                                                                     i2c Bus Detect  Status

  18 -> DS2482-100    48  -> TMP102       68 -> RTC DS1307        50  -> 24c32       

   60    ->  MCP4725     49-> ADS1015     

 

 

 use eeprog 0.7.6 can read/write  for  24c32 or 24cxx

 

     MCP4725 12bit Digital-to-Analog Converter 
*     demo  9 bit   output  sinewave.py    at address "60"

MCP4725 demo  9 bit   sinewave.py    at address "60"

 

 

mcp4725  demo sinewave.py   result

 

 

*   ADS1015 12bit  Analog-to-Digital Converter
     demo  12 bit   4 channel  input    ads1015-49.py    at address "49"

 

 

  /28.7E1CC8030000    -  Connect   &  Detect  DALLAS 18B20P   TEMP Sensor

cat temperature   --    22.312    &  32.125

 

 

Spec Detail

1. U8 RTC DS1307 with CR1220 Battery    Datasheet

2. U7 TMP102 Temperature Sensor      Datasheet

3. U9 24C32  32Kbit  EEPROM    JP10 Disable Jumper     Datasheet

4. U6 MCP4725 12bit Digital-to-Analog Converter ,    Datasheet

    JP11 (AOUT, GND)  JP1 Disable Jumper

5. U11 ADS1015 12bit  Analog-to-Digital Converter ,   Datasheet

   J7 INPUT (AIN0, AIN1,AIN2,AIN3,GND,3V3)       JP12 Disable Jumper

6, J5 (5V, GND,SCL,SDL)  I2C output

7. U15 DS2482-100  I2C to 1-Wire bridge device

     J22 1-wire Port pin 1 - pin4 

     (5V,GND, OW (1-Wire Data, ESD Protected). RT (1-Wire Return/Ground ,ESC protected)

8. U16 DS9503P 1-Wire ESD protection diode

9.  U2 - USB 7 Ports HUB chipset

     J1 (JP3)  USB HUB upper port signal input from Rs-Pi

10.  J13  Mini USB 5V input for USB Hub, you don't need plug 5V , the USB Hub

    already use 5V  from Raspberry Pi (P1 pin2), if your USB device need

   more power,  then you can plug-in 5V in this port.     

11. J11  for RS-Pi V2 GPIO connector (got 4 more GPIO pin)   

 

  Adafruit Occidentalis v0.2 image support the

  TMP102 and RTC DS1307 , ADS1015 , MCP4725

 

 
Download sample program          ads1015  sample program

  

User Manual

 

package Content

 

1x Rs-Pi 7 USB  HUB & I2C & 1-Wire board

1x  USB to MINI USB hub input cable

1x CR1220 3V Battery

1x Manual  

  

 
 

Raspberry Pi

iPad  iPhone

Products  

 

Copyright 2009
www.pridopia.co.uk
All rights reserved

Home           About us           Support           Shopping           Contacts            FAQ